Research note
Microeconomics for traders
Microeconomics explains how single markets set prices and how it differs from macro. For traders, it shows up in order books, margins and price discovery.
Short answer: microeconomics studies how individual buyers, sellers and firms make choices, and how those choices set prices and quantities in a single market. Macroeconomics studies the economy as a whole. For a trader, micro is the lens for one stock, one commodity or one order book. It explains why a bid sits where it does, why some companies can raise prices without losing customers, why margins differ so much between industries, and how new information gets into a price.
This post works through a 38-page microeconomics reference guide chapter by chapter, from scarcity to factor markets, and adds the parts that matter in markets. It explains ideas. It does not recommend any trade.
What is microeconomics?
Microeconomics is the branch of economics that studies how consumers, workers and firms allocate scarce resources, and how their choices combine to set prices and quantities in specific markets. It builds from the bottom up: individual decisions add up to market outcomes.
The questions it asks are practical ones:
- How consumers choose what to buy with a limited income
- How firms decide what to produce, how much, and at what price
- How prices form under different kinds of competition
- How resources get split across competing uses
- When and why markets fail to produce efficient outcomes
Positive and normative statements
A useful habit is to keep two kinds of claims apart. A positive statement describes how the economy works and can, in principle, be tested. A normative statement is a value judgment about what ought to happen.
"A $2 increase in the minimum wage will reduce entry-level employment by some measurable amount" is positive. You can check it against data, whether or not the data agree. "The minimum wage should be raised because it is fair" is normative. No dataset settles it.
Traders run into the same split all the time. "This company's margins fell for three straight quarters" is positive. "This company deserves a higher multiple" is a judgment, however many numbers sit next to it.
The four core assumptions
Nearly every model in microeconomics rests on four simplifications:
- Rational self-interest. People are modeled as choosing what maximizes their own well-being given the information they have. For consumers that means utility. For firms it means profit.
- Scarcity. Wants are unlimited and resources are limited. This is the problem the whole field exists to study.
- Ceteris paribus, or "all else equal." Models isolate one variable by holding the others fixed. Almost every curve in this post depends on it.
- Marginal thinking. Decisions are made at the margin, by comparing the extra benefit of one more unit with its extra cost, not by looking at averages or at costs already paid.
The ceteris paribus assumption deserves a warning label for anyone who trades. Markets almost never hold all else equal. When a stock falls on a strong earnings report, several things changed at once, and a one-variable story will usually be incomplete.
How is microeconomics different from macroeconomics?
The guide puts the split simply. Micro looks at individual markets and decision-makers. Macro looks at the economy as a whole. A typical micro question is "why did the price of coffee rise?" A typical macro question is "why is inflation rising?" Micro works with price, quantity, elasticity and market structure. Macro works with GDP, unemployment, inflation and interest rates. Micro studies the trees and macro studies the forest.
An IMF Finance & Development primer by G. Chris Rodrigo adds some useful history and detail:
- Until the Great Depression, economics was not split in two. Economists largely assumed that markets cleared, or returned to equilibrium quickly after a shock, so studying individual markets seemed enough to explain aggregates like output and unemployment.
- The Depression broke that assumption. The primer calls Keynes the founding father of macroeconomics and dates the field as a distinct discipline to his 1936 General Theory.
- Micro "is unified and has a common core among all economists," in the primer's words, while macro has competing schools of thought, such as New Keynesians and New Classicals, though the gap between them has narrowed.
- For decades, economists have tried to build macro models on micro foundations, starting from households and firms that optimize.
Robert Lucas's 1976 critique is one reason for that push. He argued that relationships estimated from aggregate data can shift when policy changes, because the people behind the aggregates change their behavior.
Why the difference matters for traders
Both lenses are useful, but they answer different questions. Macro tells you about the tide: rates, liquidity, credit conditions, the broad risk appetite of the market. Micro tells you about the boat: whether one company has pricing power, whether a commodity's supply can respond to a price spike, and whether the order book can absorb a large order.
The two can disagree. A company with strong pricing power can still fall in a broad selloff. A weak business can rally when liquidity floods in. Neither view alone tells the whole story.
MRT is built mostly around the macro side. The overview page (/) shows a Composite Regime Score, and the Lenses page (/lenses) breaks it into six weighted lenses: Macro & Liquidity, Credit, Breadth & Internals, Volatility & Options, Cross-Asset, and Sentiment & Positioning. A separate Plumbing lens works as a kill switch and is not summed into the composite. The Hidden Markov Model page (/hmm) estimates market regimes from SPY returns and realized volatility, and the Macro (/macro) and Economic Data (/econ) pages track yields, credit spreads, liquidity and economic releases. Those are all forest views. The micro views in MRT are narrower: company fundamentals on /stock pages, the fundamental filters on /screener, and the crypto order book at /crypto/order-book.
What do scarcity and opportunity cost mean?
The economic problem
Scarcity means unlimited wants meet limited resources: land, labor, capital and entrepreneurship. Because of that, every economy has to answer three questions, whatever its politics: what to produce, how to produce it, and for whom. Microeconomics is largely the study of how market economies answer those questions through prices.
Opportunity cost and sunk cost
Every choice has an opportunity cost: the value of the best alternative you gave up. It applies even when no money changes hands, because time and attention are scarce too. The guide's example is that the cost of spending a weekend building a pitch deck is the value of the best other use of that weekend.
A sunk cost is one you have already paid and can't get back. Since it stays the same whatever you decide next, a rational forward-looking decision should ignore it and weigh only future costs and benefits. Letting it steer you is the sunk cost fallacy.
Markets give this idea a lot of practice. Capital tied up in one position has an opportunity cost: whatever else that money could be doing. The price you paid for a position is sunk; the market does not know or care what it was. Research on the "disposition effect" suggests investors often struggle with this. Shefrin and Statman (1985) described the tendency to sell winners too early and ride losers too long. Odean (1998) tested it on trading records for 10,000 accounts at a large discount brokerage and found "a strong preference for realizing winners rather than losers," a pattern the later performance of those holdings did not justify.
The production possibilities frontier
The production possibilities frontier (PPF) shows the most of two goods an economy, firm or person can produce with fixed resources and current technology.
- Points on the curve are productively efficient. All resources are fully used.
- Points inside the curve are inefficient. Some resources are idle or misallocated.
- Points outside the curve can't be reached with current resources and technology.
The frontier bows outward because resources aren't equally good at everything. As you make more of one good, you have to pull in resources that are less and less suited to it, so each extra unit costs more forgone output than the last. That is the principle of increasing opportunity cost.
Growth, whether from more resources, better technology or more productive institutions, shifts the whole frontier out. War, natural disaster or a shrinking labor force shifts it in.
How do supply and demand work?
The law of demand and its determinants
Holding everything else constant, quantity demanded falls as price rises and rises as price falls. Two forces drive this. The substitution effect: as a good gets relatively more expensive, buyers switch to substitutes. The income effect: a higher price cuts real purchasing power, which reduces consumption of a normal good.
The wording matters. "Demand" is the whole relationship between price and quantity, the full curve. "Quantity demanded" is a single point on that curve at one price. A change in the good's own price moves you along the curve. A change in anything else shifts the curve. When these increase, demand changes like this:
- Income: demand rises for normal goods and falls for inferior goods
- Price of a substitute: demand for this good rises
- Price of a complement: demand for this good falls
- Taste or preference for the good: demand rises
- Expected future price: demand rises today
- Number of buyers: demand rises
The law of supply and its determinants
Holding everything else constant, quantity supplied rises as price rises. Higher prices make extra output more profitable, which draws more production from existing firms and attracts new ones. When these increase, supply changes like this:
- Input or production costs: supply falls
- Technology: supply rises
- Expected future price: supply falls today, as sellers hold back
- Number of sellers: supply rises
- Taxes: supply falls
- Subsidies: supply rises
The along-the-curve versus shift distinction is one of the most useful tools to bring to market news. A price move caused by a shift in demand (say, a new use for a commodity) means something different from one caused by a shift in supply (a mine closure), even if the price moves by the same amount.
How do markets clear, and what do price controls do?
Equilibrium
Equilibrium sits where the demand and supply curves cross: the price at which quantity demanded exactly equals quantity supplied. At that price, nothing pushes the price to move. The market clears.
If the price is above equilibrium, quantity supplied exceeds quantity demanded. That surplus pushes the price down. If the price is below equilibrium, quantity demanded exceeds quantity supplied. That shortage pushes the price up. Left alone, prices adjust until the market is back in equilibrium.
Price ceilings and price floors
A price ceiling is a legal maximum price. It only matters if it sits below equilibrium; a ceiling above equilibrium changes nothing. Rent control is the standard example. Holding the price below the market-clearing level leaves quantity demanded above quantity supplied, which creates a persistent shortage. Common side effects include black markets, lower quality and less investment, and rationing by queues, waitlists or favoritism instead of price.
A price floor is a legal minimum price. It only matters if it sits above equilibrium. The minimum wage and farm price supports are the standard examples. Holding the price above the market-clearing level leaves quantity supplied above quantity demanded, a persistent surplus. In a labor market, that surplus shows up as unemployment among the affected group.
The guide's key point is the difference between a binding and a non-binding control. A ceiling has to sit below equilibrium and a floor above it, or the control has no effect on price or quantity.
How does an order book show supply and demand?
The supply and demand diagram is a model. An exchange order book is the closest thing markets have to a live version of it.
Investor.gov, the SEC's investor education site, describes the basic order types. A market order is an order to buy or sell immediately. It guarantees execution but not price, and it generally fills at or near the current bid (for a sale) or ask (for a purchase). A limit order is an order to buy or sell at a set price or better. A buy limit only fills at the limit price or lower, and a sell limit only at the limit price or higher.
A limit order book is the set of all resting limit orders in a market at a moment in time. Gould and coauthors' survey in Quantitative Finance (2013) defines the bid as the highest resting buy price and the ask as the lowest resting sell price, with the spread as the gap between them. The survey's abstract says limit order books match buyers and sellers in more than half of the world's financial markets.
Read through a micro lens, the book maps neatly onto the guide's chapters:
- The resting bids at each price are a slice of the demand schedule: how much buyers will take at each price right now.
- The resting offers are a slice of the supply schedule.
- When a market order arrives, it trades against the best resting order. If it is bigger than what sits at the best price, it moves on to the next price level and the price moves. That is the market finding a new clearing price for that size.
- News that shifts the whole set of bids or offers is a shift of the curve, not a move along it.
Two cautions apply. First, a book shows only the intentions traders have chosen to display. The Gould survey notes that in study after study the vast majority of orders end in cancellation rather than a fill, and that hidden orders and dark pools keep some interest out of view. The visible book is a partial demand curve, not the full one. Second, Biais, Hillion and Spatt's 1995 study of the Paris Bourse found that order flow interacts with the state of the book. Thin books drew in new orders and thick books led to trades, and both bid and ask quotes shifted down after large sales and up after large purchases, which they read as consistent with information effects. The book is a curve that reacts to the trades made against it.
MRT's Crypto Order Book Depth page (/crypto/order-book) shows this for BTC and ETH pairs (BTC/USDT, BTC/USD, ETH/USDT, ETH/USD) in spot and futures. It merges books from several exchanges (OKX, Bitget, Coinbase and Kraken for spot; OKX, Bitget and Hyperliquid for futures) into one ladder, alongside a market-depth chart and a large-trades tape. Binance and Bybit are not in the merge because they are geo-blocked from MRT's backend. The page covers these crypto pairs only, not stocks.
What is elasticity?
Price elasticity of demand
Price elasticity of demand measures how strongly quantity demanded responds to price:
Ed = (% change in Qd) / (% change in P), reported as an absolute value, since it is negative for almost all goods
How to read it:
- Greater than 1: elastic. Quantity changes proportionally more than price.
- Less than 1: inelastic. Quantity changes proportionally less than price.
- Exactly 1: unit elastic. Both change by the same proportion.
- Zero: perfectly inelastic. Quantity doesn't respond to price at all, a vertical curve.
- Very large: perfectly elastic. Any price increase drops quantity to zero, a horizontal curve.
What makes demand more or less elastic:
- Substitutes. More substitutes mean more elastic demand.
- Necessity or luxury. Necessities tend to be inelastic and luxuries elastic.
- Time. Demand becomes more elastic the longer buyers have to adjust.
- Share of budget. Goods that take a bigger share of income tend to be more elastic.
- How the market is defined. A specific brand is more elastic than the product category as a whole.
Elasticity and total revenue
Since total revenue is price times quantity, what a price change does to revenue depends on elasticity:
- Elastic demand: a price increase lowers total revenue, and a price cut raises it.
- Inelastic demand: a price increase raises total revenue, and a price cut lowers it.
- Unit elastic demand: total revenue stays the same either way.
The guide's practical takeaway: if demand is elastic, cutting the price can grow revenue, because the extra volume outweighs the lower price per unit. If demand is inelastic, raising the price grows revenue, because the volume lost is proportionally smaller than the price gained.
Cross-price and income elasticity
Cross-price elasticity measures how demand for one good responds to the price of another:
Exy = (% change in Qx) / (% change in Py)- Positive means the goods are substitutes. A higher price for Y pushes demand for X up.
- Negative means they are complements. A higher price for Y pushes demand for X down.
Income elasticity measures how demand responds to income:
Ei = (% change in Qd) / (% change in income)- Positive means a normal good. Negative means an inferior good, which people buy less of as they can afford better substitutes.
- Among normal goods, a value above 1 marks a luxury, and a value between 0 and 1 marks a necessity.
Price elasticity of supply
Supply elasticity uses the same logic: the percentage change in quantity supplied divided by the percentage change in price. The main driver is time. In the very short run, supply is often close to perfectly inelastic. A crop already harvested or a sold-out concert can't expand at any price. Over the long run, producers build capacity and new firms enter, so supply becomes more elastic.
This is why commodity prices can spike so hard when demand jumps. In the short run, little new supply can come to market, so price does most of the adjusting.
How do elasticity and pricing power show up in earnings?
Elasticity is the economics behind a phrase investors use all the time: pricing power. A company whose customers face inelastic demand for its product can raise prices and, per the guide's revenue table, grow revenue. A company whose customers have many close substitutes faces elastic demand, so a price increase can shrink revenue.
Financial statements are where this becomes visible. The SEC's Beginners' Guide to Financial Statements explains the steps of an income statement. Net revenue minus the cost of sales gives gross profit, sometimes called gross margin. Subtracting operating expenses gives income from operations, and operating margin is income from operations divided by net revenues. The guide also notes that what counts as a good ratio varies by industry.
Put the pieces together and the chain looks like this:
- If a firm raises prices and volumes barely move, demand looks inelastic. Revenue rises, and unless costs rise just as fast, gross margin widens.
- If a firm raises prices and volumes fall sharply, demand looks elastic. Revenue can fall even though each unit sells for more.
- If input costs rise and a firm can't pass them on, its margins get squeezed. Whether it can pass them on depends on elasticity and on how much competition it faces.
Economists measure pricing power more formally as the markup of price over marginal cost. Abba Lerner's 1934 paper on measuring monopoly power is the classic source for this idea. De Loecker, Eeckhout and Unger (2020) estimated markups from firm-level data for the US economy. They found aggregate markups rose from 21% above marginal cost in 1980 to 61% by the end of their sample, and that the increase came mainly from the upper tail of firms while the median markup was unchanged. Their measure is an economy-wide estimate, not a reading for any single company.
Two limits are worth keeping in mind. Reported margins mix many things: accounting choices, product mix, one-off charges and the business cycle. And elasticity is not fixed. The guide's point about time cuts both ways: buyers who can't switch this quarter may switch next year.
In MRT, each /stock page shows a fundamentals block with net margin, operating margin, revenue growth and EPS growth. The /screener criteria form includes minimum filters for profit margin, gross margin and operating margin, alongside revenue and earnings growth. Those fields describe what a company reported. They don't tell you why, and a high margin is not a forecast.
How do consumers choose?
Utility and marginal utility
Utility is the satisfaction or value a consumer gets from a good. It is a theoretical tool for modeling preferences, not a unit anyone can measure. Marginal utility is the extra utility from one more unit.
The law of diminishing marginal utility says each extra unit tends to add less satisfaction than the one before. The guide's example: the first slice of pizza delivers more added satisfaction than the fifth.
The budget constraint and indifference curves
A budget constraint is limited income spread across goods at given prices. Drawn for two goods, it is a straight line showing every combination the consumer can just afford. Its slope is the negative ratio of the two prices. Points inside the line are affordable but leave money unspent. Points outside it are unaffordable.
An indifference curve shows every combination of two goods that gives the same total utility. Indifference curves:
- Slope downward, because getting more of one good means giving up some of the other to stay equally well off
- Bow toward the origin, which reflects a diminishing marginal rate of substitution
- Represent higher utility the farther they sit from the origin
- Never cross, for the same consumer
Consumer equilibrium
A consumer maximizes utility where the budget line just touches the highest reachable indifference curve. At that point, the marginal rate of substitution, the rate at which the consumer is willing to trade one good for the other, equals the price ratio. The equimarginal principle says the same thing another way:
MUx / Px = MUy / Py- The last dollar spent on each good delivers the same marginal utility.
Hayek's 1945 essay "The Use of Knowledge in Society" made the point that this is the condition an optimal allocation has to meet: marginal rates of substitution must be equal across uses. His larger argument, covered in the price discovery section below, is that nobody has all the information needed to compute it, and prices do the work instead.
Income and substitution effects
When a good's price falls, two things happen at once. The substitution effect: the good is now relatively cheaper, so the consumer shifts toward it. The income effect: purchasing power rises, which changes consumption further in a direction that depends on whether the good is normal or inferior.
For a normal good, both effects push toward buying more when the price falls. For an inferior good, they push in opposite directions. In the rare case where the income effect wins, called a Giffen good, demand can slope the "wrong" way. The guide treats this as a well-known theoretical curiosity rather than a common real-world pattern.
How do production and costs work?
The production function and diminishing returns
A production function links inputs (labor, capital, land) to output. In the short run, at least one input, usually capital, is fixed, and only variable inputs, usually labor, can change. In the long run, every input can change.
Total product is total output from a given amount of input. Marginal product is the extra output from one more unit of the variable input. Average product is total product divided by the amount of input.
The law of diminishing marginal returns says that if you keep adding a variable input, such as workers, to a fixed input, such as a factory floor, marginal product eventually falls. Each extra worker adds less than the last because there is less fixed capital to go around. The guide stresses that this is a short-run law. It need not hold once all inputs can grow together.
Short-run cost curves
Fixed cost doesn't change with output and must be paid even at zero output. Variable cost rises with output. Total cost is the sum of the two.
- Average fixed cost:
AFC = FC / Q, which always declines as output rises - Average variable cost:
AVC = VC / Q, U-shaped - Average total cost:
ATC = TC / Q = AFC + AVC, U-shaped and above AVC - Marginal cost:
MC = change in TC / change in Q, U-shaped, and it crosses AVC and ATC at their lowest points
That crossing is not a coincidence. When marginal cost is below average cost, it pulls the average down. When it is above, it pulls the average up. So marginal equals average exactly at the average's minimum. The guide compares it to a player's season average: the next game's score raises or lowers the average depending on whether it beats it.
For anyone reading company results, the falling AFC line is worth remembering. A business with high fixed costs spreads them over more units as volume grows, so average cost falls and margins can widen faster than revenue. The same arithmetic works in reverse when volume shrinks.
Economies of scale
In the long run, a firm chooses its scale.
- Economies of scale: long-run average cost falls as output rises, through specialization, bulk buying and spreading fixed costs over more units.
- Diseconomies of scale: past some point, long-run average cost rises because coordination and communication get harder.
- Constant returns to scale: long-run average cost is flat over a range of output.
- Minimum efficient scale: the smallest output at which long-run average cost reaches its minimum. It helps decide how many firms an industry can efficiently support, and so how concentrated it tends to become.
How do firms maximize profit?
Revenue concepts
- Total revenue:
TR = P x Q - Average revenue:
AR = TR / Q, which equals price for a price-taking firm - Marginal revenue:
MR = change in TR / change in Q, which equals price under perfect competition and is below price when demand slopes down
The MR = MC rule
Every firm, in any market structure, maximizes profit by producing where marginal revenue equals marginal cost. Below that quantity, the next unit adds more revenue than cost, so making it raises profit. Above it, the next unit costs more than it brings in.
The rule finds the best quantity. It doesn't guarantee a profit. Whether the firm makes money at that quantity depends on how price compares with average total cost.
When to shut down and when to exit
In the short run, fixed costs have to be paid even at zero output, so the test is price against average variable cost. If price covers AVC, the firm should keep operating even while losing money overall, because it covers its variable costs and puts something toward fixed costs. If price falls below AVC, it loses less by shutting down.
In the long run, every cost is variable, so the test is price against average total cost. If price stays below ATC, the firm can't cover its full costs and should leave the industry.
This gives the short-run supply curve of a competitive firm: the part of its marginal cost curve at or above the minimum of AVC. Below that price, it supplies nothing.
This logic shows up in commodity industries. When prices fall below the cash cost of the highest-cost producers, those producers have a reason to idle output, and supply falls. It also explains why output often doesn't drop the moment a company starts losing money on an accounting basis: if price still covers variable cost, running costs less than stopping.
What are the four market structures?
Perfect competition
Perfect competition has many small buyers and sellers, none big enough to move the price; an identical product; free entry and exit; and perfect information. Every firm is a price taker.
In the short run, firms can make an economic profit or a loss. Since entry is free, profit draws in new firms. Market supply shifts out and pushes the price down until economic profit reaches zero and firms earn only a normal profit, just enough to cover the opportunity cost of their capital. In long-run equilibrium, price equals marginal revenue equals marginal cost equals minimum average total cost. That is the most efficient outcome the model produces.
Monopoly
A monopoly has a single seller, no close substitutes, and big barriers to entry:
- Legal barriers, such as patents, licenses and government franchises
- Natural monopoly, where economies of scale are so large that one firm can supply the whole market more cheaply than several could, as with core utility infrastructure
- Control of a key input
- Network effects, where a product becomes more valuable as more people use it, which entrenches the leader
A monopolist is a price maker facing the whole downward-sloping market demand curve. To sell more, it has to lower the price on every unit, so marginal revenue sits below price. For a straight-line demand curve, MR falls twice as fast as demand. The monopolist still produces where MR equals MC, but then charges the price the demand curve allows at that quantity. Price ends up above marginal cost.
By restricting output to keep the price high, the monopolist prevents some trades that would have benefited both sides. That lost surplus is the deadweight loss of monopoly.
Monopolists can also price discriminate:
- First degree: charging each customer their maximum willingness to pay. This is rare in pure form, but personalized pricing and negotiation come close.
- Second degree: pricing by quantity or version, such as bulk discounts and good-better-best tiers.
- Third degree: charging different groups different prices based on something observable, such as student or senior discounts or regional pricing.
Monopolistic competition
Monopolistic competition has many firms selling differentiated products, through branding, features, quality or location. Each firm gets a little pricing power: its demand curve slopes down but is very elastic. Barriers to entry are low.
In the long run, free entry drives economic profit to zero, as in perfect competition. But because each firm still faces a downward-sloping demand curve, its long-run equilibrium has price equal to ATC at a point above the minimum of ATC. The firm runs with excess capacity, and price still exceeds marginal cost. The guide notes this is why restaurants, retailers and consumer brands rarely end up with the razor-thin margins of textbook perfect competition, even when entry is intense.
Oligopoly and game theory
Oligopoly has a few large firms, each big enough that its decisions directly affect its rivals. That strategic interdependence is what sets it apart; in the other three structures, firms can effectively ignore each other. Barriers to entry are usually significant: capital requirements, brand loyalty and economies of scale.
Because outcomes depend on what rivals do, game theory is central to oligopoly. Three ideas carry most of the weight:
- A payoff matrix shows each player's result for every combination of strategies.
- A dominant strategy is a player's best choice no matter what the other player does.
- A Nash equilibrium is an outcome where no player can do better by changing strategy alone, given what the others are doing. John Nash set out the concept in a 1950 paper in the Proceedings of the National Academy of Sciences.
The guide applies the prisoner's dilemma to pricing with an illustrative duopoly. Each firm can hold its price high or cut it to grab share:
- Both hold: each earns $10M.
- A holds, B cuts: A earns $2M and B earns $15M.
- A cuts, B holds: A earns $15M and B earns $2M.
- Both cut: each earns $5M.
Cutting is each firm's dominant strategy. It beats holding whatever the rival does ($15M beats $10M if the rival holds, and $5M beats $2M if the rival cuts). So the Nash equilibrium is both firms cutting, at $5M each, which is worse for both than if both had held. This is why price wars start even when both sides would rather avoid them.
A cartel is a group of firms that explicitly agree to restrict output and fix prices, acting together like one monopolist. Cartels are illegal in most places; in Canada they are prohibited under the Competition Act. Even where they aren't policed, they tend to be unstable for the prisoner's dilemma reason. Each member can profit by secretly undercutting the agreed price while the others hold it, and that temptation wears down cooperation unless monitoring and enforcement are strong.
The kinked demand curve is one model of why oligopoly prices stay put. It assumes rivals match a firm's price cuts, to defend share, but don't match its price increases, since they are happy to gain share. That creates a kink in each firm's perceived demand curve at the current price and a gap in its marginal revenue curve. Paul Sweezy set out this model in a 1939 paper in the Journal of Political Economy. It helps explain why oligopoly prices are often "sticky" even when costs move somewhat.
The four structures form a spectrum by number of firms and pricing power: perfect competition, monopolistic competition, oligopoly, monopoly.
How does market structure show up in margins?
Read this way, the market structure chapter is a theory of margins.
- In perfect competition, entry pushes price toward minimum average cost, so long-run economic profit is zero.
- In monopolistic competition, economic profit is still competed away over time, but differentiation keeps price above marginal cost.
- In oligopoly, margins depend on how rivals behave toward each other. A stable industry can keep prices well above cost. A price war, the prisoner's dilemma outcome, can wipe that out.
- In monopoly, barriers let the firm hold price above marginal cost for as long as the barriers last.
Michael Porter's 1979 framework, revisited in his January 2008 Harvard Business Review article "The Five Competitive Forces That Shape Strategy," makes a related point. He argues that competition for profits goes beyond direct rivals to include customers, suppliers, potential entrants and substitute products, and that these five forces together define an industry's structure. In the guide's terms, buyers and substitutes shape the elasticity a firm faces, and the threat of entry decides whether high profits last.
For a market reader, this suggests a few questions to ask about any reported margin. How many competitors are there? How easy is entry? How different is the product? Do rivals tend to match price cuts? A wide margin in a market with easy entry is under more pressure, in theory, than a wide margin protected by scale, patents or network effects. Theory doesn't tell you when that pressure arrives.
What is welfare economics?
Consumer and producer surplus
Welfare economics judges how well markets allocate resources from society's point of view, using the idea of surplus.
Consumer surplus is the gap between what consumers are willing to pay, shown by the demand curve, and what they actually pay, summed across all units bought. On a chart, it is the area below the demand curve and above the price.
Producer surplus is the gap between what producers actually receive and the minimum they would accept, shown by the supply curve (which reflects marginal cost), summed across all units sold. On a chart, it is the area above the supply curve and below the price.
Total surplus is consumer surplus plus producer surplus. A competitive market equilibrium maximizes total surplus. That is the precise sense in which economists call competitive markets "efficient."
Deadweight loss
Deadweight loss is the surplus lost when a market misses the efficient quantity. It stands for trades that would have helped both sides but never happen. The classic causes:
- Taxes, which drive a wedge between what buyers pay and sellers receive and cut the quantity traded
- Binding price ceilings and floors, which stop the market reaching the efficient quantity
- Monopoly power, which restricts output to keep the price high
- Externalities, where private and social costs or benefits differ
The guide's rule of thumb: anything that pushes quantity away from the competitive equilibrium, in either direction, tends to create deadweight loss, because the competitive quantity is exactly where the value of the last unit to buyers equals the cost of making it.
When do markets fail?
Externalities
An externality is a cost or benefit that lands on someone outside the transaction, so the private cost or benefit to the buyer or seller differs from the cost or benefit to society.
With a negative externality, such as a factory's pollution, the producer doesn't bear the full cost, so the market produces more than the social optimum. Marginal social cost exceeds marginal private cost.
With a positive externality, such as education, vaccination or research spillovers, the buyer or seller doesn't capture the full benefit, so the market produces less than the social optimum. Marginal social benefit exceeds marginal private benefit.
There are three standard fixes:
- A Pigouvian tax equal to the marginal external cost of a negative externality, such as a carbon tax
- A Pigouvian subsidy for a positive externality, such as subsidies for vaccination or research
- The Coase theorem: with clear property rights and low transaction costs, private parties can bargain to an efficient outcome whoever starts with the rights. Ronald Coase set out the argument in "The Problem of Social Cost" (1960). In practice, transaction costs are often high, with many affected parties, gaps in information and costly negotiation, which is why taxes and regulation remain common.
Public goods and common resources
Goods are sorted on two questions. Excludability: can non-payers be kept from using it? Rivalry: does one person's use leave less for others?
- Excludable and rival: private goods, such as a sandwich
- Excludable and non-rival: club or toll goods, such as cable TV
- Non-excludable and rival: common resources, such as ocean fisheries
- Non-excludable and non-rival: public goods, such as national defense
Because public goods are non-excludable, people can benefit without paying. This free-rider problem means private markets tend to under-provide them, which is the core economic case for public funding of things like national defense and basic research.
Common resources are rival but non-excludable, so each user has a reason to take as much as possible before others do. The result is overuse beyond the sustainable level: overfishing, groundwater depletion, overgrazing. Garrett Hardin's 1968 essay in Science gave this the name "the tragedy of the commons." Common remedies include assigning property rights (turning the resource into a private or club good), quotas and licenses, and community-based management.
Information asymmetry
Markets can also fail when one side of a trade knows more than the other.
Adverse selection is a problem before the transaction: hidden information skews the pool of people you end up trading with. In George Akerlof's 1970 "market for lemons," used-car sellers know more about quality than buyers. Since buyers can't tell good cars from bad, they offer only an average price. That pushes owners of good cars out of the market and leaves a larger share of bad ones, and the market can unravel entirely. In insurance, people who know they are higher-risk are more likely to buy coverage, which raises costs for insurers.
Moral hazard is a problem after the transaction: one party changes its behavior because it is shielded from the consequences. A fully insured driver may take less care. A manager with guaranteed pay may take on too much risk.
Markets respond in two ways. With signaling, the informed party takes a costly action to show quality credibly. Michael Spence's 1973 paper on job market signaling is the classic treatment of education as a signal of ability, and a warranty works as a signal of product quality. With screening, the uninformed party designs options that lead the informed party to reveal its type. Rothschild and Stiglitz's 1976 paper on competitive insurance markets is the classic treatment of an insurer's menu of deductibles and premiums that separates low-risk customers from high-risk ones.
Why does information asymmetry create a bid-ask spread?
Akerlof's lemons problem has a direct counterpart in every order book. A market maker who posts a bid and an offer doesn't know whether the next trader is someone who simply needs to trade or someone who knows something the market maker doesn't.
Glosten and Milgrom (1985) modeled a specialist market with traders who hold different information. In models of this kind, the market maker sets the spread wide enough that gains from uninformed traders offset expected losses to informed ones. The spread is partly a price for adverse selection. Each trade also carries information, so the market maker's quotes move after it.
Ho and Stoll (1981) added another cost: inventory. A dealer who accumulates an unwanted position takes on risk and adjusts prices to work it off. And the Gould survey describes the market maker's spread as pay for providing liquidity, for the risk of an unwanted inventory, and for exposure to adverse selection.
In these models, spreads are wider where information gaps are bigger and inventory risk is higher. A trader paying the spread is, in part, paying the market maker for facing the lemons problem.
How do taxes, subsidies and regulation change outcomes?
Taxes and tax incidence
A tax on a good drives a wedge between the price buyers pay and the price sellers receive. That cuts the quantity traded below the efficient level and creates deadweight loss.
Who actually bears a tax does not depend on who sends the money to the government. It depends on relative elasticity. Whichever side of the market is less elastic, meaning it has fewer good alternatives and can change its behavior less, bears more of the burden, whatever the law says about who pays.
If demand is very inelastic compared with supply, as with insulin, consumers keep buying nearly the same amount as the price rises, so most of the burden falls on them. If supply is very inelastic compared with demand, as with land, most of it falls on sellers.
For a stock reader, incidence is a pass-through question. When a new tax, tariff or levy hits an industry, whether the customer or the company absorbs it depends on elasticity on each side. That decides whether revenue or margin takes the hit.
Subsidies
A subsidy works like a tax in reverse. It lowers the price buyers pay below the price sellers receive and increases the quantity traded. If it corrects a positive externality, it moves the market toward the efficient quantity. Without that reason, it usually pushes quantity past the efficient level and creates its own deadweight loss. As with taxes, who captures most of the benefit depends on relative elasticity.
Regulating monopoly
Since an unregulated monopoly restricts output and raises the price, governments have several tools:
- Antitrust and competition law, which bans anticompetitive mergers, cartels and abuse of a dominant position. In Canada it is enforced under the Competition Act by the Competition Bureau.
- Price regulation, which caps what a monopolist, often a natural monopoly like a utility, can charge, usually near marginal or average cost
- Public provision or ownership, where government provides the good or service directly
- Encouraging entry, by lowering barriers where possible to add competition
How do factor markets work?
Derived demand for labor
Factor markets, for labor, capital and land, differ from goods markets in one key way. Demand for a factor is derived demand: it comes from demand for the output that the factor helps produce. A firm doesn't want labor for its own sake. It wants labor because labor helps make something customers want to buy. So anything that shifts demand for the firm's output also shifts its demand for labor and other inputs.
Marginal revenue product
Marginal revenue product measures the extra revenue a firm gets from employing one more unit of a factor:
MRP(labor) = MPL x MR, the marginal product of labor times the marginal revenue from the extra output
A profit-maximizing firm hires an input up to the point where its MRP equals its price, the wage in the case of labor. It hires another worker whenever MRP exceeds the wage and stops when MRP falls to the wage. Because of diminishing marginal returns, MPL, and so MRP, eventually falls as more workers are added to a fixed amount of capital.
- The hiring rule: hire labor until
MRP = wage.
Labor demand shifts with product demand, productivity (technology, capital per worker) and the prices of substitute or complementary inputs. Labor supply shifts with population, participation rates, wages in other jobs and non-wage factors such as working conditions.
Here micro and macro meet. Payroll and wage data are macro aggregates, but they are built from many individual hiring decisions like these. MRT's Labor & inflation page (/labor) charts the macro side, with CPI categories and nonfarm payroll and labor-force momentum against CPI.
How do markets discover prices?
Price discovery is the process by which new information gets into prices. It ties the whole guide together.
Hayek's 1945 essay is the classic statement of the idea. He argued that the knowledge an economy runs on "never exists in concentrated or integrated form but solely as the dispersed bits of incomplete and frequently contradictory knowledge which all the separate individuals possess." His example is tin: if tin becomes scarcer, users don't need to know why. The higher price tells them to economize, and the adjustment spreads through substitutes and the products made from tin. He called the price system a mechanism for communicating information.
Financial economics turned that idea into testable claims:
- Fama's 1970 review in the Journal of Finance set out the efficient markets framework, which asks how fully prices reflect available information.
- Kyle's 1985 Econometrica paper, "Continuous Auctions and Insider Trading," modeled how a trader with private information, trading alongside uninformed traders and a market maker, gradually moves prices toward the information's value.
- Hasbrouck's 1995 Journal of Finance paper measured where price discovery happens when the same security trades in several markets. Applied to quotes for the thirty Dow stocks, it found that most price discovery took place at the NYSE, with a median information share of 92.7%. That figure is from that study's sample, not today's market structure.
In the guide's language, every trade is a small test of where supply and demand meet. Buyers who think the price is too low lift offers. Sellers who think it is too high hit bids. Each trade moves the equilibrium a little and leaves information behind for the next trader.
The market failure chapter applies here too. Information asymmetry and thin books can slow or distort discovery, so a price is the market's current estimate and can be wrong.
Quick-reference formulas
Elasticity:
- Price elasticity of demand:
(% change in Qd) / (% change in P) - Price elasticity of supply:
(% change in Qs) / (% change in P) - Cross-price elasticity:
(% change in Qx) / (% change in Py) - Income elasticity:
(% change in Qd) / (% change in income)
Production and cost:
- Total cost:
TC = FC + VC - Average fixed cost:
AFC = FC / Q - Average variable cost:
AVC = VC / Q - Average total cost:
ATC = TC / Q = AFC + AVC - Marginal cost:
MC = change in TC / change in Q - Marginal product:
MP = change in TP / change in input
Revenue and profit:
- Total revenue:
TR = P x Q - Average revenue:
AR = TR / Q - Marginal revenue:
MR = change in TR / change in Q - Economic profit: total revenue minus total economic cost, including opportunity cost
- Profit-maximizing output: produce where
MR = MC - Short-run shutdown rule: shut down if price is below AVC
- Long-run exit rule: exit if price is below ATC
Consumer theory:
- Consumer equilibrium:
MUx / Px = MUy / Py - Marginal rate of substitution:
MRS = MUx / MUy
Welfare and factor markets:
- Consumer surplus: the area below the demand curve and above the price
- Producer surplus: the area above the supply curve and below the price
- Marginal revenue product:
MRP = MP x MR - Profit-maximizing hiring: hire until MRP equals the input price
Glossary
- Adverse selection: a pre-transaction information problem where hidden traits bring in a disproportionate share of undesirable counterparties.
- Average total cost (ATC): total cost divided by quantity produced.
- Barriers to entry: factors that stop or discourage new firms from entering a profitable market.
- Budget constraint: the combinations of goods a consumer can afford given income and prices.
- Cartel: a group of firms that collude to restrict output and raise price, acting together like a monopoly.
- Ceteris paribus: "all else equal," the assumption that isolates one variable by holding the others constant.
- Coase theorem: with clear property rights and low transaction costs, private bargaining can resolve externalities efficiently whoever starts with the rights.
- Consumer surplus: the gap between what consumers are willing to pay and what they pay.
- Deadweight loss: the total surplus lost by producing away from the efficient quantity.
- Derived demand: demand for an input that comes from demand for the output it helps make.
- Diminishing marginal returns: the tendency for marginal product to fall as more of a variable input is added to a fixed input.
- Economic profit: total revenue minus total cost, including opportunity costs. It is different from accounting profit.
- Economies of scale: long-run average cost falling as output rises.
- Elasticity: how responsive one variable is to a change in another, most often quantity to price.
- Externality: a cost or benefit that falls on a third party outside a transaction.
- Free-rider problem: the tendency to under-provide non-excludable goods because people can benefit without paying.
- Indifference curve: combinations of goods that give a consumer equal utility.
- Inferior good: a good people buy less of as income rises.
- Marginal cost (MC): the extra cost of producing one more unit.
- Marginal revenue (MR): the extra revenue from selling one more unit.
- Marginal revenue product (MRP): the extra revenue from employing one more unit of an input.
- Marginal utility: the extra satisfaction from consuming one more unit.
- Market equilibrium: the price and quantity where quantity demanded equals quantity supplied.
- Monopolistic competition: many firms selling differentiated products, each with some pricing power.
- Monopoly: a single seller with significant barriers to entry.
- Moral hazard: a post-transaction information problem where a party changes behavior because it is shielded from the consequences.
- Nash equilibrium: an outcome where no player can improve their payoff by changing strategy alone.
- Normal good: a good people buy more of as income rises.
- Oligopoly: a few large, interdependent firms.
- Opportunity cost: the value of the next-best alternative given up.
- Perfect competition: many small price-taking firms selling an identical product, with free entry and exit.
- Pigouvian tax: a tax equal to the marginal external cost of a negative externality.
- Price ceiling: a legal maximum price, binding only if set below equilibrium.
- Price discrimination: charging different customers different prices for the same good, for reasons unrelated to cost differences.
- Price elasticity of demand: the percentage change in quantity demanded divided by the percentage change in price.
- Price floor: a legal minimum price, binding only if set above equilibrium.
- Producer surplus: the gap between what producers receive and the minimum they would accept.
- Production possibilities frontier (PPF): the most of two goods that can be produced with fixed resources and technology.
- Public good: a good that is both non-excludable and non-rival.
- Scarcity: limited resources relative to unlimited wants.
- Sunk cost: a cost already paid that can't be recovered, and so is irrelevant to forward-looking decisions.
- Tragedy of the commons: the tendency to overuse a resource that is rival but non-excludable.
FAQ
What is the main difference between microeconomics and macroeconomics?
Microeconomics studies individual markets and decision-makers: consumers, firms, and the prices and quantities they produce. Macroeconomics studies aggregates for the whole economy, such as GDP, unemployment, inflation and interest rates. Micro asks why the price of coffee rose. Macro asks why inflation is rising.
Is microeconomics useful for trading?
It gives traders a vocabulary for single markets. Order books are a live, partial view of supply and demand. Elasticity and market structure help explain pricing power and margins. Information asymmetry helps explain bid-ask spreads. It does not, on its own, tell you where a price will go.
How does elasticity relate to a company's earnings?
Revenue is price times quantity, so elasticity decides what a price change does to revenue. If customers keep buying after a price increase, demand is inelastic and revenue rises. If they leave, demand is elastic and revenue can fall. Whether that flows through to margin also depends on costs and competition.
What is price discovery?
Price discovery is the process by which new information gets into prices through trading. Hayek described prices as a system for passing on dispersed knowledge. Later work, such as Kyle (1985) and Hasbrouck (1995), modeled and measured how and where it happens.
Why do some industries have higher margins than others?
Market structure is a big part of the answer. Free entry tends to compete economic profit away. Differentiation, scale, patents and network effects can keep price above marginal cost. Porter's five forces add buyers, suppliers, substitutes and potential entrants to the picture.
Sources
- "Microeconomics: A Comprehensive Reference Guide", 38-page reference PDF, 2026: source document supplied for this post (not published online)
- G. Chris Rodrigo, "Micro and Macro: The Economic Divide", IMF Finance & Development, Back to Basics series, accessed 2026-10-17: https://www.imf.org/external/pubs/ft/fandd/basics/6_micro-macro.htm
- Lucas, "Econometric policy evaluation: A critique", Carnegie-Rochester Conference Series on Public Policy 1, 1976: https://doi.org/10.1016/S0167-2231(76)80003-6
- Shefrin and Statman, "The Disposition to Sell Winners Too Early and Ride Losers Too Long: Theory and Evidence", Journal of Finance 40(3), 1985: https://doi.org/10.1111/j.1540-6261.1985.tb05002.x
- Odean, "Are Investors Reluctant to Realize Their Losses?", Journal of Finance 53(5), 1998: https://doi.org/10.1111/0022-1082.00072
- US Securities and Exchange Commission, Investor.gov, "Types of Orders", accessed 2026-10-17: https://www.investor.gov/introduction-investing/investing-basics/how-stock-markets-work/types-orders
- Gould, Porter, Williams, McDonald, Fenn and Howison, "Limit order books", Quantitative Finance 13(11), 2013: https://doi.org/10.1080/14697688.2013.803148
- Biais, Hillion and Spatt, "An Empirical Analysis of the Limit Order Book and the Order Flow in the Paris Bourse", Journal of Finance 50(5), 1995: https://doi.org/10.1111/j.1540-6261.1995.tb05192.x
- US Securities and Exchange Commission, "Beginners' Guide to Financial Statements", Jan. 12, 2014 (last reviewed Feb. 6, 2017): https://www.sec.gov/about/reports-publications/beginners-guide-financial-statements
- Lerner, "The Concept of Monopoly and the Measurement of Monopoly Power", Review of Economic Studies 1(3), 1934: https://doi.org/10.2307/2967480
- De Loecker, Eeckhout and Unger, "The Rise of Market Power and the Macroeconomic Implications", Quarterly Journal of Economics 135(2), 2020: https://doi.org/10.1093/qje/qjz041
- Hayek, "The Use of Knowledge in Society", American Economic Review 35(4), 1945, via Econlib, accessed 2026-10-17: https://www.econlib.org/library/Essays/hykKnw.html
- Nash, "Equilibrium points in n-person games", Proceedings of the National Academy of Sciences 36(1), 1950: https://doi.org/10.1073/pnas.36.1.48
- Sweezy, "Demand Under Conditions of Oligopoly", Journal of Political Economy 47(4), 1939: https://doi.org/10.1086/255420
- Porter, "The Five Competitive Forces That Shape Strategy", Harvard Business Review, January 2008: https://hbr.org/2008/01/the-five-competitive-forces-that-shape-strategy
- Coase, "The Problem of Social Cost", Journal of Law and Economics 3, 1960: https://doi.org/10.1086/466560
- Hardin, "The Tragedy of the Commons", Science 162(3859), 1968: https://doi.org/10.1126/science.162.3859.1243
- Akerlof, "The Market for 'Lemons': Quality Uncertainty and the Market Mechanism", Quarterly Journal of Economics 84(3), 1970: https://doi.org/10.2307/1879431
- Spence, "Job Market Signaling", Quarterly Journal of Economics 87(3), 1973: https://doi.org/10.2307/1882010
- Rothschild and Stiglitz, "Equilibrium in Competitive Insurance Markets: An Essay on the Economics of Imperfect Information", Quarterly Journal of Economics 90(4), 1976: https://doi.org/10.2307/1885326
- Glosten and Milgrom, "Bid, ask and transaction prices in a specialist market with heterogeneously informed traders", Journal of Financial Economics 14(1), 1985: https://doi.org/10.1016/0304-405X(85)90044-3
- Ho and Stoll, "Optimal dealer pricing under transactions and return uncertainty", Journal of Financial Economics 9(1), 1981: https://doi.org/10.1016/0304-405X(81)90020-9
- Fama, "Efficient Capital Markets: A Review of Theory and Empirical Work", Journal of Finance 25(2), 1970: https://doi.org/10.2307/2325486
- Kyle, "Continuous Auctions and Insider Trading", Econometrica 53(6), 1985: https://doi.org/10.2307/1913210
- Hasbrouck, "One Security, Many Markets: Determining the Contributions to Price Discovery", Journal of Finance 50(4), 1995: https://doi.org/10.1111/j.1540-6261.1995.tb04054.x
- MacroMomentum Terminal, Composite Regime Score and Lenses pages, accessed 2026-10-17: / and /lenses
- MacroMomentum Terminal, Crypto Order Book Depth page, accessed 2026-10-17: /crypto/order-book
- MacroMomentum Terminal, stock fundamentals and screener margin filters, accessed 2026-10-17: /stock and /screener
Educational only, not financial advice. Past and backtested results do not guarantee future returns. Do your own research or speak with a licensed professional before making investment decisions.